When buying stainless steel beads wholesale, specify the outer dimensions, finished hole diameter, material grade, construction and surface finish before comparing prices. Then review samples with the actual chain, cord or wire used in your design. A bead can have the right appearance but still fail to fit the intended assembly.
yanluojewelry is the jewelry wholesale brand of Guangzhou Yanluo Industrial Co., Ltd., established in 2015 and based in Guangzhou, China. We support stainless steel jewelry wholesale and OEM/ODM projects. For loose beads or other components, ask our team to confirm supply availability, material options and project-specific quantities.
Which Measurements Should a Bead Inquiry Include?
“Small round stainless steel beads” is a starting description, but it is not enough for an accurate quotation. State dimensions in millimetres and identify the measurement points on a drawing.
- Round beads: outer diameter and finished through-hole diameter.
- Tube beads: length, outer diameter and internal opening.
- Spacer beads: width, thickness, shape and hole direction.
- Decorative beads: overall dimensions, opening position and orientation in the assembled design.
Agree acceptable dimensional tolerances with the supplier before approving production. Keep the same measurement method for the sample and the bulk order.
How Do You Choose a Hole Size for a Chain or Cord?
Check the largest part that must pass through the bead during assembly. This may be a chain end, connector, doubled cord or needle rather than the nominal chain width.
For example, a chain body might pass through an opening while its fitted end does not. Decide whether beads will be threaded before or after the end components are attached. Do not approve a hole size from chain width alone.
Request a fit check using the actual assembly materials. The bead should move or stay in position as intended without being forced. Also inspect the hole edges for roughness that could catch the chain or damage the cord.
Specify 316L Material and Bead Construction Separately
If your collection requires 316L stainless steel beads, write that requirement against the bead SKU. A general stainless steel description does not establish a specific grade. Ask what material evidence is available and which items it covers.
Also confirm whether the bead is solid metal with a drilled opening, hollow, or fitted with an internal insert. Similar-looking beads can differ in weight, construction and assembly behaviour. If an insert is required, specify its material and intended function separately.
For a complete necklace or bracelet, review the other parts too. Our guide to specifying 316L jewelry components explains why each relevant component needs its own material requirement.
Approve the Finish on the Complete Assembly
State whether you need polished stainless steel, a gold-tone finish, black PVD or another treatment. Ask the supplier to confirm the proposed process for the selected bead rather than assuming every colour uses the same coating method.
Compare beads with the intended chain, clasp and spacers under consistent lighting. Approve a physical reference for colour and texture where matching matters. A screen image alone is a weak reference for finish approval.
Keep material identity, coating specifications and finished-product testing as separate questions. A 316L declaration alone does not establish coating durability or destination-market compliance.
What Should Buyers Check in a Sample?
- Measure the bead and opening against the agreed drawing.
- Thread it onto the intended chain, cord or wire using the planned assembly sequence.
- Inspect visible surfaces and hole edges for scratches, burrs or unwanted seams.
- Compare colour and texture with the other approved components.
- Check the assembled piece for the intended spacing, movement and overall feel.
- Record the approved sample reference and any changes required before production.
These checks help review fit and appearance. They do not replace suitable material verification or any testing required for the finished product.
Compare Wholesale Quotes on the Same Basis
Request separate quantities for each size, shape and finish. Confirm whether the MOQ applies per SKU or finish, whether existing tooling is suitable, and whether samples or new tooling carry separate charges.
Ask the quotation to identify the counting unit, packing method, sample schedule, production schedule and shipping scope. If a substitute is proposed, review its dimensions, material, construction and finish before accepting it.
Frequently Asked Questions
Are all stainless steel beads made from 316L?
No. Confirm the declared grade for each selected bead and request evidence appropriate to your requirements.
Will the same hole size fit every chain of the same width?
Do not assume so. Link shape, end components and assembly sequence can affect fit. Test the actual chain and bead together.
Can I mix bead sizes and finishes to meet the MOQ?
Ask for written confirmation. Quantity requirements can differ by size, finish, construction and production route.
Can Yanluo supply loose beads rather than finished jewelry?
Send the specification for review. Component-only supply, available options, MOQ and sampling terms must be confirmed for the project.
Request a Bead or Custom Jewelry Review
Send your reference image or drawing, bead dimensions, required hole size, chain or cord details, quantity per style, material and finish. Include logo or packaging requirements, destination country and target delivery date. Tell us whether you need loose components or an assembled jewelry product.
Read about our OEM/ODM jewelry development process if your beads are part of a custom necklace or bracelet.
Request a component or custom jewelry quotation
Email: info@yanluojewelry.com
One thought on “Stainless Steel Beads Wholesale: Sizes, Hole Fit and Sample Checks”