To source custom stainless steel brooches wholesale, approve the complete brooch rather than the decorative front alone. Specify its dimensions and weight, pin-back construction, intended wearing direction, fabric use and component materials. Request front and back drawings, then review a working sample on representative fabric before confirming a bulk order.
Yanluo Jewelry is the jewelry brand of Guangzhou Yanluo Industrial Co., Ltd., established in 2015 in Guangzhou, China. Our team handles wholesale and OEM/ODM jewelry inquiries. Send your brooch concept for a feasibility review; available constructions, material grades, customization and order quantities must be confirmed for your design.
Why consider a brooch collection?
Brooches give boutiques and gift retailers a product that can be displayed on clothing, cards or gift packaging. They also create a different purchasing problem from necklaces: the back mechanism, weight distribution and fabric interaction can determine whether a good-looking design is practical to wear.
Perles & Co included brooches and stainless-steel options in its October 29, 2026 Christmas-market ideas. This is a supplier’s seasonal selection, not proof that a particular design will sell. Use customer feedback and a focused sample assortment before expanding your range.
Choose the pin-back construction before requesting a price
Do not use “brooch pin” as the entire specification. A horizontal hinged pin and catch, a post with a separate clutch, and a decorative safety-pin design have different wearing and packing requirements. The options below are structures to discuss, not a list of confirmed Yanluo stock.
| Construction | What the buyer should define | What the sample should demonstrate |
|---|---|---|
| Hinged pin with catch | Pin length, hinge position, catch type and closure direction | Access to the catch, consistent engagement and the position of the closed tip |
| Post with separate clutch | Post count, spacing, usable length and matching clutch | Clutch fit, orientation and the complete supplied parts count |
| Decorative safety-pin design | Overall opening, wire dimensions and any attached decorations | Opening movement, tip enclosure and movement of attached parts |
Approve one mechanism by reference or drawing. If another construction is proposed later, review it as a specification change, including its effect on the fabric, appearance and packaging.
Specify front and back geometry together
Size, profile and wearing direction
Give the maximum width, height and thickness in millimeters. State the intended top edge and whether the piece should sit horizontally, vertically or at an angle. A back-view drawing should identify that same orientation; otherwise, an asymmetrical motif can receive a fastening that positions it incorrectly.
Request the finished sample weight and side profile. For a long or raised design, inspect whether it tips forward, rotates or pulls the fabric away from the body. Decide whether the fastening needs repositioning before approving the front artwork.
Fabric fit
Name the intended use: a structured lapel, knitted cardigan, scarf or another garment. Test on representative fabric supplied or agreed by the buyer. Review attachment, removal, visible pulling, movement and any marks left by the pin. A result on thick outerwear does not establish suitability for delicate fabric.
Ask for photos of the front and back while worn, plus a short closure demonstration. Keep the physical sample for approval; video alone may conceal uncomfortable edges or difficult handling.
Identify the material of each component
A stainless-steel decorative body does not establish the grade of the pin, hinge, catch or clutch. List them individually. If your project requires 316L, mark exactly which parts must meet that requirement and ask the supplier to identify any exceptions before quoting.
- Decorative front: base material, construction and surface finish.
- Pin or post: material, dimensions and attachment position.
- Hinge, catch or clutch: material, matching reference and finish.
- Added decorations: material, attachment and permitted movement.
Use the 316L jewelry component specification guide to organize the list. Ask what evidence covers each component. Material identity alone does not prove closure reliability, coating life or suitability for every wearer.
Approve finish and branding without blocking the mechanism
State whether the front, edges and visible back should match or intentionally contrast. For a gold-tone finish, identify the proposed process and approve a physical color reference. Review moving surfaces after finishing so the catch remains accessible and operates as intended.
For a logo or engraved message, mark the usable area on the back drawing. Keep it clear of the hinge, pin travel and catch. Request artwork at actual size and inspect legibility on the finished sample. An available marking area may be smaller than the decorative face suggests.
Use a brooch-specific sample approval checklist
- Match the front, back and side profile to the agreed drawing.
- Confirm dimensions, finished weight and wearing direction.
- Open and close the mechanism using an agreed review procedure; record sticking, looseness or inconsistent engagement.
- Check the closed tip, catch engagement, attachment points and unintended sharp edges.
- Assess balance, handling and fabric effects on the representative garment material.
- Compare finish, decoration placement and logo legibility with the approved references.
- Fit the brooch to its retail card or box and inspect the packed back.
Use the jewelry sample approval checklist to record accepted details and unresolved changes. Agree any required functional tests and acceptance criteria separately; a casual opening demonstration is not a durability test.
Define the retail unit, packaging and quotation scope
State whether one unit means one brooch with its complete fastening, a coordinated pair or a themed set. Specify spare clutches only if required and agreed. Show the mounting position on the retail card, including access to the fastening and protection from contact with neighboring products.
Request separate quotation lines for development or tooling, samples, finished brooches, branding, retail packaging and freight. Ask whether the minimum quantity applies per motif, finish or packaging version. Existing designs and new custom constructions can have different requirements.
Provide the destination country and required arrival date for US, UK or EU orders. Separate sample development, approval, production and transport in the schedule. Confirm a feasible delivery plan before advertising a seasonal launch.
Copy this custom brooch inquiry brief
- Project: adult fashion brooch; intended garment or fabric.
- Design: original drawing or reference, with front, back and side views.
- Size and construction: dimensions, weight target, orientation and preferred fastening.
- Materials: required grade for each metal component and any permitted alternatives.
- Appearance: finish reference, decorative elements, logo artwork and location.
- Order: quantity per motif and finish; individual piece or set.
- Packaging: mounting card or box, labels and included parts.
- Approval: sample requirements, fabric reference and requested checks.
- Delivery: destination, target date and requested shipping scope.
Frequently asked questions
Can I request a custom 316L stainless steel brooch?
Yes, you can specify that requirement in your inquiry. Feasibility and the material of the decorative body and fastening components need confirmation before an order is agreed.
What is the MOQ for custom stainless steel brooches wholesale?
Request a project-specific minimum. Motif, construction, tooling, finish and packaging can affect the quantity; do not assume one minimum covers every version.
Will the same brooch work on a coat and a delicate scarf?
Do not assume so. Evaluate weight, fastening and fabric effects on representative materials, and describe the intended use accurately.
Can a logo be engraved on the back?
Submit the artwork and preferred position. The team must review the available surface, marking process and clearance around the fastening.
Does Yanluo have every pin-back type ready to order?
Availability is not established by this guide. Share your drawing or mechanism reference so the team can confirm the supply and development scope.
Discuss your brooch concept with Yanluo
Explore our OEM/ODM jewelry development service, then send your reference images, quantity per style, component materials, finish, logo and packaging requirements, destination and target date. Include a back-view drawing and fabric reference for a more useful feasibility review.
Discuss your custom brooch project on WhatsApp: +86 139 2279 9812
Send your brooch brief for review and quotation | Email info@yanluojewelry.com